hifi engine

Manual Library / BGW

BGW 250

Stereo Power Amplifier

add a review add a review

BGW 250

Description

The BGW 250D is a professional stereo power amplifier incorporating clipping indicators on the front panel.

An on/off circuit breaker switch, gain controls, and the indicator lights are located on the front panel; all other external features are mounted on the rear.

The BGW 250E is identical to the 250D model but for the inclusion of dual solid state VU meters rather than clipping indicators.

Specifications

  • Power output: 100 watts per channel into 8Ω (stereo), 251W into 8Ω (mono)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.1%

    Damping factor: 230

    Gain: 26 dB

    Input sensitivity: 1.4V

    Signal to noise ratio: 106dB

    Speaker load impedance: 4Ω (minimum)

    Semiconductors: 2 x IC, 31 x transistors, 6 x zener diodes, 18 x diodes, 3 x LED

    Dimensions: 133 x 483 x 298mm

    Weight: 11.2kg

  • Power output: 100 watts per channel into 8Ω (stereo), 251W into 8Ω (mono)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.1%

    Damping factor: 230

    Gain: 26 dB

    Input sensitivity: 1.4V

    Signal to noise ratio: 106dB

    Speaker load impedance: 4Ω (minimum)

    Semiconductors: 3 x IC, 51 x transistors, 6 x zener diodes, 26 x diodes, 20 x LED

    Dimensions: 133 x 483 x 298mm

    Weight: 11.2kg

Downloads

Comments

re: 250b

We cannot find any information about BGW 250B service manual or schematic diagram in any website to repair our unit.

This website is not affiliated with or sponsored by BGW. To purchase 250 spares or accessories, please contact the company via their website or visit an authorised retailer.