hifi engine

Manual Library / Bowers and Wilkins

Bowers and Wilkins DM6

Floorstanding Loudspeaker System

add a review (2 reviews)

Bowers and Wilkins DM6

Specifications

Type: 3 way, 3 driver loudspeaker system

Frequency Response: 50Hz to 20kHz

Recommended Amplifier: 25 to 350W

Crossover Frequency: 500, 6000Hz

Impedance: 8Ω

Sensitivity: 95dB

Bass: 1 x DW250

Midrange: 1 x MR150

Tweeter: 1 x 19mm TW20

Dimensions: 931 x 410 x 380mm

Year: 1972

Downloads

Reviews

 Login or register to post reviews

rating
Reviewed Nov 24th, 2016 by Alec124c41

Lovely coherent sound. A piece of dowel in the front of each of the feet relieves any sag, and firms up the sound.
Cheers,
Alec

rating
Reviewed Jun 24th, 2015 by Paul Co

I just bought a pair of these DM 6 speakers and was amazed at the sound. These have Kevlar mid-range cones and a fairly large woofer.. No need for a Sub woofer either as they produce deep rich bass sound. mid-range and tweeters are really good also - they may look a little odd to some - Pregnant Penguins as they called.. but the sound is the main thing after all. They really blow away the Paradigm 7SE's that I replaced them with. I do tend to like the Acoustic Suspension speakers over the Bass Reflex better.

 

Comments

re: DM6

Just picked up a pair and they are "loverly" but the Bass units are suffering from the Surrounds sagging.

The Spec Sheet does not give the dimensions of the Woofers, does anyone know what they are and/or where to find the correct surrounds?

re: DM6

Rotate the drivers 180 degrees.

Cheers,
Alec

This website is not affiliated with or sponsored by Bowers and Wilkins. To purchase DM6 spares or accessories, please contact the company via their website or visit an authorised retailer.