hifi engine

Manual Library / Bowers and Wilkins

Bowers and Wilkins DM620

2-Way Loudspeaker System

add a review (1 review)

Bowers and Wilkins DM620


Type: 2 way, 3 driver loudspeaker system

Frequency Response: 58Hz to 20kHz

Recommended Amplifier: 25 to 100W

Crossover Frequency: 3000Hz

Impedance: 8Ω

Sensitivity: 90dB

Bass Radiator: 1 x 200mm polypropylene cone

Bass: 1 x 200mm polypropylene cone

Tweeter: 1 x 26mm dome

Dimensions: 742 x 236 x 302mm

Weight: 14.2kg



 Login or register to post reviews

Reviewed Feb 20th, 2019 by Madmac

I bought these totally beaten. The tweeters were pushed in by the house todler and on one speaker was the surround almost completely detached.

So I took apart the tweeter and pushed the aluminium dome back into shape. Than I glued the surround back to the cone. Not the prettiest job, but it functions fine.

Because it’s a two way system with passive woofer I did not have high expectations of these speakers.... man was I wrong !
They sound more then decent ! Very neutral sound. Sweet highs. Mids are non fatigueing yet present. And if you need more low, just flip the loudness and tadaa BASS !

When fixing them I took them apart. These speaker cabinets are build to survive a 4 meter drop or something. The inner bracing is enormous.

Next I will buy the 3 way DM580 because these little one made me curious what the bigger brothers will do.



This website is not affiliated with or sponsored by Bowers and Wilkins. To purchase DM620 spares or accessories, please contact the company via their website or visit an authorised retailer.