hifi engine

Manual Library / Carver

Carver Cinema System 5.2

Tower Speakers and Centre Speaker

add a review add a review

Carver Cinema System 5.2

Specifications

  • Type: 2 way, 3 driver center channel loudspeaker

    Frequency Response: 80Hz to 21kHz

    Recommended Amplifier: 50 to 200W

    Impedance: 8Ω

    Sensitivity: 91dB

    Midrange: 2 x 5.5"

    Tweeter: 1 x 1"

    Dimensions: 20 x 7.75 x 9.25 inches

    Weight: 30lbs

  • Type: 5 driver loudspeaker system

    Frequency Response: 24Hz to 21kHz

    Recommended Amplifier: 50 to 200W

    Crossover Frequency: 100Hz

    Impedance: 4Ω

    Sensitivity: 89dB

    Bass: 2 x 10"

    Midrange: 1 x 5.5", 1 x 2.5"

    Tweeter: 1 x 1"

    Dimensions: 8 x 15 x 42 inches

    Weight: 65lbs

    Note: 300W subwoofer amplifier

Downloads

Comments

re: Cinema System 5.2

Thank you for posting this manual!! I just bought this system used but it's sitting in my garage as I was reluctant to tackle this installation without instructions. Perhaps you might answer a question for me though. I've read that the center channel emits a hum depending on whether or not the factory fixed a certain problem or not. Are you aware of this? Are you aware of any way to determine if the center channel was fixed other than turning on the system to find the hum? Not being very technically inclined, I found instructions on how to fix the problem but none without pictures. I couldn't tell a capacitor from a cavity to be honest. Any insight, if you're so inclined, would be appreciated. Again, for thanks for posting this manual. I'm at least ready to give it a try.
Regards,
John

This website is not affiliated with or sponsored by Carver. To purchase Cinema System 5.2 spares or accessories, please contact the company via their website or visit an authorised retailer.