hifi engine

Manual Library / Carver

Carver SD/A-360

5-Disc Carousel CD Player with Linear Single-Bit D/A Convertor

add a review add a review

Carver SD/A-360

Description

The Carver SD/A-360 is a 5 disc carousel CD player with Linear Single Bit D/A Conversion for increased sonic definition, detail and accuracy.

You have chosen a quality-first CD player with triple-beam laser scanning, full remote control including intro scan, shuffle and repeat play.

In addition, the SD/A-360 features edit play, which allows you to easily record from CD to tape, calculating how many tracks will fit on a side and pause just before the end of the tape to allow you time to turn the tape over and begin recording the remaining tracks on the other side.

For added convenience and versatility, remote control jacks are included to connect with systems using the increasingly popular RC-5 bus format.

And to top things off, the SD/A-360 provides an optical digital output which can be used to pass the digital signal to an outboard digital-to-analogue converter using a fibre optic cable - this will transmit the signal in the cleanest possible way.

Specifications

Disc format: CD (5 disc multi play)

Digital converter: SAA7350, Bitstream 1 bit, 8 x oversampling

Frequency response: 20Hz to 20kHz

Dynamic range: 90dB

Signal to Noise Ratio: 100dB

Channel separation: 80dB

Total harmonic distortion: 0.004%

Line output: 2V

Digital outputs: optical

Dimensions: 102 x 483 x 425mm

Weight: 6.6kg

Accessories: RH-60 remote control

Downloads

Comments

This website is not affiliated with or sponsored by Carver. To purchase SD/A-360 spares or accessories, please contact the company via their website or visit an authorised retailer.