hifi engine

Manual Library / Classe Audio

Classe Audio DR-3

Stereo Power Amplifier

add a review add a review

Classe Audio DR-3

Specifications

  • Power output: 25 watts per channel into 8Ω (stereo), 100W into 8Ω (mono)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.1%

    Input sensitivity: 0.8V

    Signal to noise ratio: 85dB

    Speaker load impedance: 1Ω (minimum)

    Dimensions: 483 x 280 x 362mm

    Weight: 32kg

  • Power output: 40 watts per channel into 8Ω (stereo), 160W into 8Ω (mono)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.1%

    Gain: 25 dB

    Input sensitivity: 0.8V

    Signal to noise ratio: 88dB

    Speaker load impedance: 1Ω (minimum)

    Dimensions: 483 x 420 x 365mm

    Weight: 45kg

Downloads

Related Catalogues

Technology Reflected in Music

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

This website is not affiliated with or sponsored by Classe Audio. To purchase DR-3 spares or accessories, please contact the company via their website or visit an authorised retailer.