hifi engine

Manual Library / Creek

Creek 5250

Stereo Integrated Amplifier

add a review add a review

Creek 5250

Specifications

  • Power output: 50 watts per channel into 8Ω (stereo)

    Frequency response: 3Hz to 25kHz

    Total harmonic distortion: 0.05%

    Input sensitivity: 0.75mV (MC), 3.5mV (MM), 450mV (line)

    Signal to noise ratio: 105dB (line)

    Channel separation: 60dB (line)

    Output: 0.6V (Pre out)

    Dimensions: 420 x 60 x 280mm

    Weight: 7kg

  • Power output: 50 watts per channel into 8Ω (stereo)

    Frequency response: 3Hz to 25kHz

    Total harmonic distortion: 0.05%

    Input sensitivity: 0.75mV (MC), 3.5mV (MM), 450mV (line)

    Signal to noise ratio: 105dB (line)

    Channel separation: 60dB (line)

    Output: 0.6V (Pre out)

    Dimensions: 420 x 60 x 280mm

    Weight: 7kg

    Accessories: remote control

  • Power output: 60 watts per channel into 8Ω (stereo)

    Frequency response: 3Hz to 25kHz

    Total harmonic distortion: 0.05%

    Input sensitivity: 0.75mV (MC), 3.5mV (MM), 470mV (line)

    Signal to noise ratio: 105dB (line)

    Channel separation: 60dB (line)

    Output: 0.66V (Pre out)

    Dimensions: 420 x 60 x 280mm

    Weight: 7kg

    Accessories: remote control

Downloads

Comments

This website is not affiliated with or sponsored by Creek. To purchase 5250 spares or accessories, please contact the company via their website or visit an authorised retailer.