hifi engine

Manual Library / Denon

Denon AVR-2309

Audio Video Surround Receiver (2008-09)

add a review add a review

Denon AVR-2309

Specifications

Tuning range: FM, MW

Power output: 100 watts per channel into 8Ω (stereo)

Surround output: 100W (front), 100W (center), 100W (rear)

Frequency response: 10Hz to 100kHz

Total harmonic distortion: 0.08%

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 74dB (MM), 100dB (line)

Speaker load impedance: 6Ω to 16Ω

Digital inputs: coaxial, optical

Video Connections: HDMI, composite, component, SVHS

Dimensions: 434 x 171 x 414mm

Weight: 12.3kg

Accessories: RC-1099/1107 remote control

Downloads

Related Catalogues

General

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: AVR-2309CI

No sound at all from surround back right in 5.1 setup. tried everything that a normal customer can can do, @audyssey calibration it wont find right back channel not even possible to get noice out of it in manual mode. the amp is pretty old and not sure if its worth fixing so wanna try and do it myself, i just have to figure out where to begin

This website is not affiliated with or sponsored by Denon. To purchase AVR-2309/AVR-2309CI spares or accessories, please contact the company via their website or visit an authorised retailer.