hifi engine

Manual Library / Denon

Denon AVR-3312

Integrated Network AV Receiver (2011-12)

add a review add a review

Denon AVR-3312

Specifications

Tuning range: FM, MW

Power output: 125 watts per channel into 8Ω (stereo)

Surround output: 125W (front), 125W (center), 125W (rear)

Frequency response: 10Hz to 100kHz

Total harmonic distortion: 0.05%

Input sensitivity: 200mV (line)

Signal to noise ratio: 102dB (line)

Speaker load impedance: 6Ω to 16Ω

Digital inputs: coaxial, optical

Video Connections: HDMI, component, composite, SVHS

Dimensions: 434 x 167 x 382mm

Weight: 11.8kg

Accessories: remote control

Year: 2011

Downloads

Related Catalogues

Network Made Easy

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: AVR-3312

Thanks, finally managed to get a copy of service manual to fix my faulty unit, it can not be power on and not responding to any button. end up C3082 shorted with measured 18 ohms. Causing MCU reset pin been pulled down and disabling the whole unit. Thanks for providing great info.

Beside document, If member could contribute D&M FW firmware writer via serial together latest firmware repository here will make this place perfect for last resource of recovery.

This website is not affiliated with or sponsored by Denon. To purchase AVR-3312 spares or accessories, please contact the company via their website or visit an authorised retailer.