hifi engine

Manual Library / Denon

Denon AVR-4800

Audio Video Surround Receiver

add a review add a review

Denon AVR-4800


Tuning range: FM, MW

Power output: 125 watts per channel into 8Ω (stereo)

Surround output: 125W (front), 125W (center), 125W (rear)

Frequency response: 10Hz to 100kHz

Total harmonic distortion: 0.05%

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 74dB (MM), 105dB (line)

Output: 150mV (line)

Speaker load impedance: 6Ω to 16Ω

Digital inputs: optical, coaxial

Video Connections: component, composite, SVHS

Dimensions: 434 x 181 x 494mm

Weight: 21.5kg

Accessories: RC-869 remote control



re: AVR-4800

Thanks goldengateer for uploading the service manual. I had replaced my 4800 with a 4311 to support digital switching. The 4800 sat in a box in storage for a few years. Working fine when I put it in the box. I pulled it out to set up a system in my shop and now it trips out when the power button is pushed. It begins it's diagnostics and after about 5 seconds, goes in to alarm/blinking light mode. This service manual should be a life saver in trouble shooting it.


This website is not affiliated with or sponsored by Denon. To purchase AVR-4800 spares or accessories, please contact the company via their website or visit an authorised retailer.