hifi engine

Manual Library / Denon

Denon PMA-1055R

Stereo Integrated Amplifier (2000-06)

add a review add a review

Denon PMA-1055R

Specifications

Power output: 65 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 100kHz

Total harmonic distortion: 0.07%

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 86dB (MM), 107dB (line)

Output: 150mV (line)

Dimensions: 434 x 144 x 347mm

Weight: 9.9kg

Accessories: remote control

Downloads

Related Catalogues

Complete

General

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

lowlow007's picture

re: PMA-1055R

I have this model in black, found in a cash xxxxx.
It was full of dust but at only 50 € !
With the remote, yès sir !
After a good cleaning, contact cleaner etc, what a nice surprise, this amp is very cool, powerfull, not too much coloured, good dynamic, in a word, an excellent amplifer !
And "cherry on the cake", a line out so that you can use it as a pre-amplifier or with a subwoofer.
Coupled with a Krell KSA 80 ( a real 80's vintage), it is very excellent ! Neutral, large bandwidth, very good S/N ratio and very musical.
I say, if you can find one, then GO !

This website is not affiliated with or sponsored by Denon. To purchase PMA-1055R spares or accessories, please contact the company via their website or visit an authorised retailer.