hifi engine

Manual Library / Denon

Denon PMA-915R

Stereo Integrated Amplifier (1995-96)

add a review add a review

Denon PMA-915R


Power output: 80 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.02%

Input sensitivity: 0.2mV (MC), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 76dB (MC), 94dB (MM), 110dB (line)

Output: 150mV (line)

Dimensions: 434 x 160 x 351mm

Weight: 9kg

Accessories: RC-176 remote coontrol

Year: 1996


Related Catalogues

The Whole Spectrum of Music

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: PMA-915R

Just got a used PMA-915R and to my surprise it doesn't sound bright.

To me the amp sounds neutral with a good bass, (Mission QX-2) good design,finish without any buttons,functions you don't need, no subsonic filter,personally i don't have bass problems.

I wouldn't have an amp with less power than a PMA-915R with 88db speakers that go down to 3.6ohm as the lowest.

PRO: Good sound and it doesn't have any functions,buttons you don't need,fair amount of power.

Cons: Can't be used with banana speaker plugs, no subsonic filter (for some it may be a problem, not for me), no preout so you can't connect a subwoofer (not a problem for me) or a more powerfull amp (not a problem for me), not super super clean power as you get with a 2x200watt + amp (im up,downgraded from a 2x300 watt 1khz 8ohm pa amp).

This website is not affiliated with or sponsored by Denon. To purchase PMA-915R spares or accessories, please contact the company via their website or visit an authorised retailer.