hifi engine

Manual Library / Denon

Denon PRA-2000

Solid State Stereo Pre Amplifier (1979-86)

add a review add a review

Denon PRA-2000


  • Frequency response: 10Hz to 100kHz

    Total harmonic distortion: 0.002%

    Input sensitivity: 0.125mV (MC), 2.5mV (MM), 150mV (line)

    Signal to noise ratio: 79dB (MC), 86dB (MM), 105dB (line)

    Channel separation: 90dB (MM), 70dB (MC), 80dB (line)

    Output: 150mV (line), 1.5V (Pre out), 25V (Pre out Max)

    Semiconductors: 14 x FET, 149 x transistors, 68 x diodes, 1 x IC, 6 x LED

    Dimensions: 455 x 132 x 357mm

    Weight: 10.5kg

    Year: 1979

  • Frequency response: 1Hz to 300kHz

    Total harmonic distortion: 0.0015%

    Input sensitivity: 0.1mV (MC), 2.5mV (MM), 150mV (line)

    Signal to noise ratio: 80dB (MC), 90dB (MM), 105dB (line)

    Channel separation: 65dB (line)

    Output: 150mV (line), 1V (Pre out), 12V (Pre out Max)

    Dimensions: 462 x 145 x 385mm

    Weight: 10.6kg

    Year: 1984


Related Catalogues


HiFi Components

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: PRA-2000

The year of introduction was 1979. The PRA-2000 is the best devise from these series of ulimative preamps by Denon. Please remember.

This website is not affiliated with or sponsored by Denon. To purchase PRA-2000/PRA-2000Z spares or accessories, please contact the company via their website or visit an authorised retailer.