hifi engine

Manual Library / Dokorder

Dokorder 800

AM/FM Stereo Receiver (1969)

add a review add a review

Dokorder 800

Specifications

  • Tuning range: FM, MW

    Power output: 55 watts per channel into 8Ω (stereo)

    Frequency response: 10Hz to 100kHz

    Total harmonic distortion: 0.5%

    Damping factor: 30

    Input sensitivity: 2.5mV (MM), 180mV (line)

    Signal to noise ratio: 70dB (MM), 75dB (line)

    Speaker load impedance: 4Ω to 32Ω

    Semiconductors: 38 x transistors, 30 x diodes, 2 x IC

    Dimensions: 19-5/8 x 13-3/4 x 6-1/2 inches

    Weight: 30lbs

    Year: 1969

  • Tuning range: FM, MW

    Power output: 60 watts per channel into 8Ω (stereo)

    Frequency response: 15Hz to 100kHz

    Total harmonic distortion: 0.8%

    Damping factor: 30

    Input sensitivity: 2.5mV (MM), 180mV (line)

    Signal to noise ratio: 70dB (MM), 75dB (line)

    Output: 180mV (line)

    Speaker load impedance: 4Ω to 16Ω

    Semiconductors: 38 x transistors, 31 x diodes, 2 x IC

    Dimensions: 20 x 14 x 6-3/4 inches

    Weight: 33lbs

    Year: 1969

Downloads

Comments

This website is not affiliated with or sponsored by Dokorder. To purchase 800 spares or accessories, please contact the company via their website or visit an authorised retailer.