hifi engine

Manual Library / Dynacord

Dynacord DPA 4245

Stereo Power Amplifier

add a review add a review

Dynacord DPA 4245

Specifications

Power output: 230 watts per channel into 8Ω (stereo), 560W into 8Ω (mono)

Frequency response: 45Hz to 30kHz

Total harmonic distortion: 0.2%

Damping factor: 300

Gain: 34 dB

Input sensitivity: 0.775V

Signal to noise ratio: 100dB

Speaker load impedance: 4Ω (minimum)

Dimensions: 483 x 132.5 x 382mm

Weight: 20.5kg

Downloads

Comments

This website is not affiliated with or sponsored by Dynacord. To purchase DPA 4245 spares or accessories, please contact the company via their website or visit an authorised retailer.