hifi engine

Manual Library / Dynacord

Dynacord DPA 4260

Stereo Power Amplifier

add a review add a review

Dynacord DPA 4260


Power output: 300 watts per channel into 8Ω (stereo), 600W into 8Ω (mono)

Frequency response: 45Hz to 30kHz

Total harmonic distortion: 0.2%

Damping factor: 300

Gain: 35 dB

Input sensitivity: 0.775V

Signal to noise ratio: 100dB

Speaker load impedance: 4Ω (minimum)

Dimensions: 483 x 132.5 x 382mm

Weight: 22.5kg



This website is not affiliated with or sponsored by Dynacord. To purchase DPA 4260 spares or accessories, please contact the company via their website or visit an authorised retailer.