hifi engine

Manual Library / Fisher

Fisher RS-1015

AM/FM Stereo Receiver

add a review add a review

Fisher RS-1015


Tuning range: FM, MW

Power output: 15 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.8%

Input sensitivity: 2mV (MM), 150mV (line)

Signal to noise ratio: 60dB (MM), 70dB (line)

Channel separation: 40dB (line)

Dimensions: 6-1/16 x 19-1/8 x 13-1/8 inches

Weight: 21.6lbs



re: RS-1015

About a year ago I picked up a used one in minty cosmetic condition and tested working. Came home and cleaned it, deoxited it, and set it up in my bedroom's rig. Also tried it in the living room and the 15 watt didn't like the bigger room. Back in my room it excelled expectations. Bass was clean and tight, mids totally integrated with lows and highs, which never became bothersome. Details and instruments were nicely placed and controlled. Front face illumination is pleasant.
Worked great for months. Then one night the sound from the right side was no longer there. Bummer.

This website is not affiliated with or sponsored by Fisher. To purchase RS-1015 spares or accessories, please contact the company via their website or visit an authorised retailer.