hifi engine

Manual Library / Hafler

Hafler DH-100

Active Pre Amplifier (1988)

add a review add a review

Hafler DH-100

Specifications

  • Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.005%

    Gain: 20dB (line)

    Input sensitivity: 12mV (MM)

    Signal to noise ratio: 100dB (MM), 100dB (line)

    Channel separation: 45dB (line)

    Output: 3V (Pre out), 8V (Pre out Max)

    Semiconductors: 6 x IC, 5 x diodes, 1 x LED

    Dimensions: 13.5 x 3 x 10 inches

    Weight: 7lbs

  • Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.005%

    Gain: 34dB (MM), 20dB (line)

    Input sensitivity: 10mV (MM)

    Signal to noise ratio: 100dB (MM), 100dB (line)

    Channel separation: 55dB (line)

    Output: 3V (Pre out)

    Semiconductors: 7x IC, 5 x diodes, 1 x LED

    Dimensions: 13-9/16 x 3 x 10 inches

    Weight: 7lbs

Downloads

Related Catalogues

Products

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

re: DH-100

It's a simple preamp with excellent performance. With the tone controls centered, it passes a 1 kHz square wave with no distortion!

This website is not affiliated with or sponsored by Hafler. To purchase DH-100 spares or accessories, please contact the company via their website or visit an authorised retailer.