hifi engine

Manual Library / Heathkit

Heathkit AA-1640

Stereo Power Amplifer

add a review add a review

Heathkit AA-1640

Specifications

Power output: 200 watts per channel into 8Ω (stereo), 800W into 8Ω (mono)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.05%

Input sensitivity: 1.25V

Signal to noise ratio: 100dB

Downloads

Comments

re: AA-16400

Pulled Heath 1600 out of stash so I could clean relays (critical on old amps) on Mitsubishi DA-15. Running Sony STC 7000 to amp to Bose 301's. Right of the bat, highs were tingling. Very noticeable. Listening right now, very detailed, nice bass, not over powered. I need to start swapping more. Merry Christmas~ I'm sorry I see this is for AA 1640. Well here's one for AA 1600.

re: AA-1640

This amp works very well with my Maggie Tympani's, much to my surprise and delight. I tried several other large and seemingly more appropriate power amps but the Heathkit just kept sounding better. Lessons learned of how speakers chose their amps.

This website is not affiliated with or sponsored by Heathkit. To purchase AA-1640 spares or accessories, please contact the company via their website or visit an authorised retailer.