hifi engine

Manual Library / Hitachi

Hitachi SR-6010

AM/FM Stereo Receiver (1980-81)

add a review add a review

Hitachi SR-6010


Tuning range: FM, MW

Power output: 35 watts per channel into 8Ω (stereo)

Frequency response: 15Hz to 30kHz

Total harmonic distortion: 0.04%

Damping factor: 30

Input sensitivity: 3mV (MM), 150mV (line)

Signal to noise ratio: 75dB (MM), 92dB (line)

Output: 150mV (line)

Dimensions: 435 x 110 x 296mm

Weight: 6.5kg

Year: 1980


Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: SR-6010

Can someone please explain how the PNP transistor Q717 2Sa844 works in conjunction with the power led indicator The neg of the LED goes through a 2.2k resistor to a bunch of transistors at the top of the schematic base is max 5 volt max with a 47k resistor with is connected to an IC junction with a diode and a coil. The emiter is connected to 48 volts with the collector connected to the positive of the LED? If someone can give me the basics of what is going on here. Thanks

re: SR-6010

good stuff

This website is not affiliated with or sponsored by Hitachi. To purchase SR-6010 spares or accessories, please contact the company via their website or visit an authorised retailer.