hifi engine

Manual Library / JBL

JBL 4410

Loudspeaker System (1987-03)

add a review (1 review)

JBL 4410

Specifications

  • Type: 3 way, 3 driver loudspeaker system

    Frequency Response: 45Hz to 20kHz

    Power Handling: 125W

    Crossover Frequency: 800, 4500Hz

    Impedance: 8Ω

    Sensitivity: 90dB

    Bass: 1 x 250mm aquaplas laminate cone

    Midrange: 1 x 125mm felted paper cone

    Tweeter: 1 x 25mm pure titanium dome

    Finish: oiled walnut

    Dimensions: 597 x 362 x 286mm

    Weight: 19kg

  • Type: 3 way, 3 driver loudspeaker system

    Frequency Response: 45Hz to 20kHz

    Power Handling: 125W

    Crossover Frequency: 900, 4000Hz

    Impedance: 8Ω

    Sensitivity: 90dB

    Bass: 1 x 250mm aquaplas laminate cone

    Midrange: 1 x 125mm cone

    Tweeter: 1 x 25mm pure titanium dome

    Grille: charcoal

    Finish: matte gray laminate

    Dimensions: 597 x 362 x 286mm

    Weight: 19kg

Downloads

Related Catalogues

Casa Auto

Loudspeaker Systems

Professional

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Reviews

 Login or register to post reviews

rating
Reviewed Apr 18th, 2016 by bergo46

Firstly the 4410's are a flat out, conservative, objective 7+ PERIOD. Meaning that if you were to hook them up to your receiver etc... and the results have you question my judgment in a negative way. The cause would be anything other than the speakers. Secondly, my personal opinion is that the 4410's qualify for being branded as the (that'll do pig) speakers. I have never heard them sound like (well, they could have done a little better.) No, its always (s*** I thought they would sound like crap in the closet, but that's not bad.) In a way you could say that they try along with you, instead of fighting... Like that pair of speakers that will remain nameless. To sum it up, I'd say that the low's are well rounded and warm, the mid's are clear and even, and the high's ting, they don't hiss anything out at you. The drawbacks would be 1. the low drivers not being quite big enough to fill that larger size two story living room. And in that event you could go with the 4412's but that's another story. And 2. If money is on the tight side, well the answer is a big fat no. (A: the Initial cost $500-$1000 not including shipping. They are heavy. B re-coned, re-capped, NOS drivers $$$. Every thing must be in good shape for that 7 or better to be a reality.) That is not to say that they wouldn't be worth the ramen diet for a while.
Bergo '45

 

Comments

This website is not affiliated with or sponsored by JBL. To purchase 4410/4410A spares or accessories, please contact the company via their website or visit an authorised retailer.