hifi engine

Manual Library / JBL

JBL 4435

Loudspeaker System (1987-94)

add a review add a review

JBL 4435


Type: 2 way, 2 driver loudspeaker system

Frequency Response: 30Hz to 16kHz

Power Handling: 375W

Crossover Frequency: 1000Hz

Impedance: 8Ω

Sensitivity: 96dB

Bass: 1 x 380mm cone

Tweeter: 1 x 44mm

Finish: oiled walnut

Dimensions: 908 x 965 x 435mm

Weight: 114kg

Year: 1987


Related Catalogues

Casa Auto

Loudspeaker Systems

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


marcuswilson's picture

re: 4435

I used a pair of these in my studio for a number of years. I found that the compression driver diaphragms overheated, the voice coil bubbled on the inside and rubbed on the pole piece. I made a tool to sand the inside of the coil former and remove the bubbles.
I was not completely satisfied with these monitors and replaced them with a pair of 4350's which sound much better in my opinion.

This website is not affiliated with or sponsored by JBL. To purchase 4435 spares or accessories, please contact the company via their website or visit an authorised retailer.