hifi engine

Manual Library / JVC

JVC 4VR-5445

FM/AM 4-Channel Stereo Receiver with SEA

add a review (1 review)

JVC 4VR-5445


Tuning range: FM, MW

Power output: 26W/ch into 8Ω (quadraphonic)

Frequency response: 15Hz to 50kHz

Total harmonic distortion: 0.5%

Damping factor: 30

Input sensitivity: 2.5mV (MM), 100mV (line)

Signal to noise ratio: 65dB (MM), 70dB (line)

Channel separation: 50dB (line)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 5-7/8 x 22-7/8 x 14 inches

Weight: 33lbs


Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Mar 25th, 2018 by 71451RC

Bought this for next to nothing to use while my Sony STR-6800sd is in the shop. Was genuinely surprised at how good this short, long receiver is. Made in the 70's when quad was all the rage (of course, the lack of records being recorded in Quad killed that). Attached an Akai GX-260d reel to reel and a Pioneer CD player, as well as a set of Pioneer CS-99a speakers. Good, clean, clear sound. If you turn the loudness switch on, you do not need a subwoofer. Very good FM without an external antenna as well. Has more dials and switches than you will ever use, as well as a built in equalizer. This may be a keeper as a back up.



This website is not affiliated with or sponsored by JVC. To purchase 4VR-5445 spares or accessories, please contact the company via their website or visit an authorised retailer.