hifi engine

Manual Library / JVC


S.E.A Graphic Equalizer (1980-81)

add a review add a review



Output Level: 2V (8V max)

Gain: ± 0dB

Frequency response: 10Hz to 100kHz

Signal to Noise Ratio: 118dB

Total harmonic distortion: 0.003%

Control Range: ± 12dB

Frequency Bands: 16, 31.5, 63, 125, 250, 500, 1K, 2K, 4K, 8K, 16K, 32KHz

Dimensions: 420 x 159 x 318mm

Weight: 6kg

Year: 1980


Related Catalogues

Graphic Equalizers

High Fidelity

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: SEA-70

Does anyone know if this equalizer can be used with a Onkyo receiver?

re: SEA-70

i have tried but does not seem to work, i want to hook mine up to an 809, but I don't have a manual to show the way it should hook up, if at all. hopefully you can get some dialogue going here and someone who has had success will sound in.


re: SEA-70

if your amp has a tape/dat..in and out or a pre in/out you can hook it up .....just use the line out on the EQ to a tape in and line in to to tape out.....and put your amp on monitor to use the EQ.....there are a few ways of doing it using a tape deck but this should work...

karodimitrov's picture

re: SEA-70

What are you trying to do? Onkyo, SEA-70 and Amplifier?Or what?Can't understand.

This website is not affiliated with or sponsored by JVC. To purchase SEA-70 spares or accessories, please contact the company via their website or visit an authorised retailer.