hifi engine

Manual Library / JVC

JVC TD-V542

Stereo Cassette Deck

add a review add a review

JVC TD-V542

Specifications

Type: 3-head, single compact cassette deck

Track System: 4-track, 2-channel stereo

Tape Speed: 4.8 cm/s

Heads: 1 x combination record/playback, 1 x erase

Motor: 1 x reel, 1 x capstan, 1 x mechanism

Tape Type: type I, CrO2, Metal

Noise Reduction: B, C, HX Pro

Frequency Response: 15Hz to 19kHz  (Metal tape)

Signal to Noise Ratio: 74dB  (dolby C)

Wow and Flutter: 0.023%

Total Harmonic Distortion: 0.7%

Input: 80mV (line)

Output: 0.3V (line)

Dimensions: 435 x 133 x 333mm

Weight: 5.5kg

Accessories: remote cable

Downloads

Comments

re: TD-V542

I got a V542-deck, going too fast and unstable. After changing the two SMD-caps on the motor-board it was fine again. For me it's one of the best cassette device that I've met.

Some pics for illustration:

http://old-fidelity.de/thread-4040-page-2.html

Be careful with soldering, the circuit is a very sensitive thin-layer isolated print on a metal-plate!

re: TD-V542

I replaced the 2 caps on my 541 with 10mfd 35 volt caps.they wasnt surface mount type they was regular size caps and i had long leads so they sat to the side of the board.it works great now.seems this was a major problem with those caps.

This website is not affiliated with or sponsored by JVC. To purchase TD-V542 spares or accessories, please contact the company via their website or visit an authorised retailer.