hifi engine

Manual Library / JVC

JVC VN-900

Solid State Stereo Integrated Amplifier

add a review add a review

JVC VN-900


The VN-900 features 220W power output, power bandwidth of 20Hz to 20'000Hz, phono input loading, S.E.A control system, S.E.A record switch for tape recording and dual facilities for tape monitoring and tape dubbing.


Power output: 50 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 50kHz

Total harmonic distortion: 0.05%

Damping factor: 50

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 56dB (MM), 86dB (line)

Output: 180mV (line), 30mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 39 x transistors, 16 x diodes

Dimensions: 5-3/8 x 16-5/8 x 12-1/2 inches

Weight: 28lbs


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by JVC. To purchase VN-900 spares or accessories, please contact the company via their website or visit an authorised retailer.