hifi engine

Manual Library / Kenwood

Kenwood 1090VR

Audio Video Surround Receiver (1997)

add a review (1 review)

Kenwood 1090VR

Specifications

Tuning range: FM, MW

Power output: 150 watts per channel into 6Ω (stereo)

Surround output: 150W (front), 150W (center), 150W (rear)

Frequency response: 5Hz to 85kHz

Total harmonic distortion: 0.003%

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 77dB (MM), 97dB (line)

Output: 200mV (line), 1V (Pre out)

Speaker load impedance: 6Ω to 16Ω

Digital inputs: coaxial, optical

Video Connections: composite, SVHS

Dimensions: 440 x 162 x 392mm

Weight: 13kg

Accessories: remote control

Year: 1997

Downloads

Reviews

 Login or register to post reviews

rating
Reviewed Feb 12th, 2015 by fastandcoolclub

I have been using this as an amp consistently for 17 years. Currently, is serves as a 20ft x 27ft dance floor amp with 2 sets of 4 ohm speakers going through a speaker selector.
This thing was built to last and it has. This aids in the fact Ohm mismatching damages your amp claims are not entirely true. The amp is rated 6-16 where 6 is not the true nominal but a suggested range.

 

Comments

This website is not affiliated with or sponsored by Kenwood. To purchase 1090VR spares or accessories, please contact the company via their website or visit an authorised retailer.