hifi engine

Manual Library / Kenwood

Kenwood KA-1010

Stereo Integrated Amplifier (1989-90)

add a review add a review

Kenwood KA-1010

Specifications

Power output: 55 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 50kHz

Total harmonic distortion: 0.03%

Damping factor: 40

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 75dB (MM), 100dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 440 x 133 x 275mm

Weight: 6.4kg

Year: 1989

Downloads

Related Catalogues

Hi-Fi Stereo

HiFi Programm

HiFi

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

Pesho_Sestrimeca's picture

re: KA-1010

Hi Guys.
Sorry if its too late i want to know is there any way to make my Kenwood KA-1010 to play both channels A and B at the same time. Thanks For The Answer.

Peshe_Sestrimeca

Ivy Caudieus's picture

re: KA-1010

Hello Pesho_Sestrimeca,

I have a kenwood ka-58, front view similar to kenwood KA-1010 (except there is no "CD Direct") as I remember .... you just need to push the speakers selector (both, A and B ) to " ON " position, thats it.
Hope it helps

Ivy Caudieus

This website is not affiliated with or sponsored by Kenwood. To purchase KA-1010 spares or accessories, please contact the company via their website or visit an authorised retailer.