hifi engine

Manual Library / Kenwood

Kenwood KA-5002

Solid State Integrated Amplifier (1971)

add a review add a review

Kenwood KA-5002


Power output: 30 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 50kHz

Total harmonic distortion: 0.5%

Damping factor: 45

Input sensitivity: 2.5mV (mic), 0.06mV (MC), 2.5mV (MM), 200mV (line)

Signal to noise ratio: 67dB (mic), 45dB (MC), 65dB (MM), 77dB (line)

Speaker load impedance: 4Ω to 16Ω

Dimensions: 16-15/16 x 5-5/32 x 11-1/16 inches

Weight: 20lbs


Related Catalogues

Amplifiers and Tuners

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: KA-5002

Outstandig peace of equipment.
“Jiro Kasuga” made his job at his best. These little 30w pr channel feels like STRONG 80watts at least. If you can find 1 in good working condition my advice grab it as fast as you can 100% satisfaction guaranty!! Will never disapoint.

This website is not affiliated with or sponsored by Kenwood. To purchase KA-5002 spares or accessories, please contact the company via their website or visit an authorised retailer.