hifi engine

Manual Library / Kenwood

Kenwood KR-100

Solid State Stereo AM/FM Receiver (1969)

add a review add a review

Kenwood KR-100


Tuning range: FM, MW

Power output: 33 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 30kHz

Total harmonic distortion: 0.5%

Damping factor: 24

Input sensitivity: 2.5mV (MM), 160mV (line)

Signal to noise ratio: 60dB (MM), 70dB (line)

Channel separation: 50dB (line)

Output: 160mV (line), 32mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 4 x IC, 2 x FET, 35 x transistors, 38 x diodes, 5 x thermistors

Dimensions: 16-1/2 x 5-1/2 x 12-1/4 inches

Weight: 22.4lbs



This website is not affiliated with or sponsored by Kenwood. To purchase KR-100 spares or accessories, please contact the company via their website or visit an authorised retailer.