hifi engine

Manual Library / Kenwood

Kenwood KR-2120

Solid State Stereo AM/FM Receiver (1970)

add a review (1 review)

Kenwood KR-2120


Tuning range: FM, MW

Power output: 10 watts per channel into 8Ω (stereo)

Frequency response: 25Hz to 30kHz

Total harmonic distortion: 0.8%

Damping factor: 50

Input sensitivity: 2.5mV (MM), 180mV (line)

Signal to noise ratio: 60dB (MM), 70dB (line)

Output: 180mV (line), 36mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 1 x IC, 1 x FET, 26 x transistors, 21 x diodes

Dimensions: 424 x 133 x 314mm

Weight: 7.2kg

Accessories: optional walnut cabinet

Year: 1970



 Login or register to post reviews

Reviewed Jan 03rd, 2018 by telegraph-hill

Even they are not get any prices for their technical data specifications in Distortion or output power, these entry level Trio Receivers sound very good. And I do say sound because they do let modern digital harsh produced Songs sound much softer and warmer. The amplifier sound design was made to sounding close to the old valve receivers. Usually there are no problems other than new lamps (use the original spec bulbs, no LED) and some crackling pots. Get one with Walnut case for just 100€... and have fun..



This website is not affiliated with or sponsored by Kenwood. To purchase KR-2120 spares or accessories, please contact the company via their website or visit an authorised retailer.