hifi engine

Manual Library / Kenwood

Kenwood KR-8010

AM/FM Stereo Receiver (1978-79)

add a review add a review

Kenwood KR-8010


Tuning range: FM, MW

Frequency response: 5Hz to 100kHz

Total harmonic distortion: 0.03%

Damping factor: 35

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 84dB (MM), 105dB (line)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 4Ω (minimum)

Dimensions: 534 x 167.5 x 459mm

Weight: 18.3kg

Year: 1978


Related Catalogues

Hi-Fi Stereo

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


Barrettt123's picture

re: KR-8010

How to clean internal unit dust etc.

re: KR-8010

I got the Kr 8010 receiver from Ebay recently . it is big power 130 watts to push my 15'' Jenson speaker with beautiful sound. You can unplug the power cord first then take off the cover ( take off couple screws first) ,clean it with w40 by a small brush.Good luck to you.( you must wait half hour later when the w40 dry up completely.)

This website is not affiliated with or sponsored by Kenwood. To purchase KR-8010 spares or accessories, please contact the company via their website or visit an authorised retailer.