hifi engine

Manual Library / Kenwood

Kenwood KR-V7080

Audio Video Surround Receiver (1996)

add a review (1 review)

Kenwood KR-V7080

Specifications

Tuning range: FM, MW

Power output: 100 watts per channel into 8Ω (stereo)

Surround output: 100W (front), 100W (center), 30W (rear)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.06%

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 75dB (MM), 95dB (line)

Speaker load impedance: 4Ω to 16Ω

Video Connections: composite

Dimensions: 440 x 148 x 389mm

Weight: 10.2kg

Accessories: remote control

Year: 1996

Downloads

Reviews

 Login or register to post reviews

rating
Reviewed May 11th, 2017 by RusselinArizona

Very good sound, very good power, but the IR Receiver for the remote control within the Kenwood, has an issue. I found a solution, the problem is basically that the wiring to the IR Receiver doesn't hold up to heat very well. A soldering job will do the trick just fine! Bring it to a shop, or better yet, DIY.

 

Comments

re: KR-V7080

I have a problem with my sound output. I shifted residences and when i reconnected the sound terminals at the back, i cant get any output from the sub woofer. im sure it aint a componect malfunction.
what could be the problem?

This website is not affiliated with or sponsored by Kenwood. To purchase KR-V7080 spares or accessories, please contact the company via their website or visit an authorised retailer.