hifi engine

Manual Library / Kenwood

Kenwood KRF-V4550D

Audio Video Surround Receiver (2001-02)

add a review (1 review)

Kenwood KRF-V4550D


Tuning range: FM, MW

Power output: 60 watts per channel into 4Ω (stereo)

Surround output: 80W (front), 80W (center), 60W (rear)

Frequency response: 13Hz to 53kHz

Total harmonic distortion: 0.7%

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 75dB (MM), 91dB (line)

Output: 200mV (line), 2V (Pre out)

Speaker load impedance: 4Ω (minimum)

Digital inputs: coaxial, optical

Video Connections: composite

Dimensions: 440 x 143 x 400mm

Weight: 8.9kg

Accessories: remote control

Year: 2001


Related Catalogues

Home Hi-Fi

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Feb 01st, 2015 by colin44ct357

totally amazing sound and power, blew my socks off.
simple small problems, dj's etc.



colin44ct357's picture

re: KRF-V4550D

found a design fault on the unit.
the top i/o digital input pcb has 2 yellow wires, ac, going directly to a cap which supplies the power to the 3.3v smd regulator.
the main cap on the circuit was very hot and the 470uf smd metal can cap on the reg was also warm.
cut the one yellow ac supply rail to this input and inserted a 1n5408.
Smd reg and caps now cold as they should be.
spent 2 days restoring the unit and dont know if some idiot had replaced the diode with a resistor on the pcb but all sorted.
Magic unit and sounds excellent.
44ct357, cape town SA.

This website is not affiliated with or sponsored by Kenwood. To purchase KRF-V4550D spares or accessories, please contact the company via their website or visit an authorised retailer.