hifi engine

Manual Library / Kyocera

Kyocera R-861

Stereo Receiver

add a review (1 review)

Kyocera R-861

Specifications

Tuning range: FM, MW

Power output: 100 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.02%

Damping factor: 60

Input sensitivity: 0.125mV (MC), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 74dB (MC), 85dB (MM), 90dB (line)

Output: 130mV (line)

Dimensions: 460 x 132 x 360mm

Weight: 12.3kg

Accessories: AM loop antenna, FM dipole antenna

Downloads

Reviews

 Login or register to post reviews

rating
Reviewed Feb 10th, 2017 by johnnyvee

I just acquired my Kyocera R-861 flagship, I obtained Sewell Silverback banana plug speaker cable and let it rip through my Cerwin Vega RE 30's 4 ohm. Wow, immediately noticeable expanded and detailed soundstage. Sharpened definition of all instruments that appeared in different parts of the listening room, Very impressive. Recommended, superior cooling tube system as well.

 

Comments

re: R-861

I just finished a job that I put off for 20 years....the slider (ALPS) volume control had become so bad that I thought my Advent Legacy II 's would blow.The peak power LED's always flashed.Bad news.

Great results,if you look you can see a tiny port that control cleaner/lube will blow into - you must look very hard,as it is under the remote/std switch lever arm.

Perfectly quiet now,like new.Not a better receiver ever made IMHO.

Job took 45 minutes and a beer (Warsteiner)

This website is not affiliated with or sponsored by Kyocera. To purchase R-861 spares or accessories, please contact the company via their website or visit an authorised retailer.