hifi engine

Manual Library / Luxman

Luxman L-31

Solid State Integrated Amplifier (1978-79)

add a review add a review

Luxman L-31

Description

The Luxman L-31 was designed to seek the best cost performance and to attain simplicity yet retaining the necessary features for true Hi-Fi from the viewpoint of practical use after an exhaustive review of current amplifiers in terms of both circuit and function.

Specifications

Power output: 38 watts per channel into 8Ω (stereo)

Frequency response: 15Hz to 50kHz

Total harmonic distortion: 0.05%

Damping factor: 90

Input sensitivity: 2.6mV (MM), 150mV (line)

Signal to noise ratio: 64dB (MM), 83dB (line)

Semiconductors: 27 x transistors, 8 x diodes, 2 x zener diodes, 1 x led

Dimensions: 440 x 160 x 225mm

Weight: 7kg

Downloads

Related Catalogues

Complete Audio Products

Ultimate High Fidelity Stereo Components

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Comments

VintageAudioRepairs's picture

re: L-31

Simple circuit but produces a wonderful sound . Damping factor of 90 help a lot.
If repairing one, be aware of hidden dry solder joints around output transistor socket as they will cause output to fail instantly.
Replace DC offset and Bias trim pots if you can. BE CAREFUL !! Solder tracks are quite fragile and will damage if prolonged heat is applied. Paired with T33 tuner , produces quite nice, warm sound.
I must add, one of the better Luxman's i repaired and owned...
(tested with DALI Concept 6 and Paradigm 9se mkII)

re: L-31

Just recap a L-31 - so easy wjth this Luxman building. Great sound.

This website is not affiliated with or sponsored by Luxman. To purchase L-31 spares or accessories, please contact the company via their website or visit an authorised retailer.