hifi engine

Manual Library / Mark Levinson

Mark Levinson no 28

Stereo Pre Amplifier (1990)

add a review add a review

Mark Levinson no 28

Description

The Mark Levinson no. 28 is a stereo pre-amplifier with off board power supply, balanced inputs and outputs, and a phono stage option.

Specifications

Gain: 58dB (MC), 38dB (MM), 18dB (line)

Output: 6V (Pre out Max)

Dimensions: 444 x 276 x 76mm

Year: 1990

Downloads

Comments

re: no 28

Today is a sad day! I managed, during moving, to snap off the potentiometer of my No.28. (Monitor Select knob) I have the knob, but needs to replace the potentiometer. I would be very greateful if anyone could help me locating an replacement potentiometer?

re: no 28

Hi,

I am not sure if you will be able to obtain parts from a dealer in Norway, but send an email to Harman International and see what they recommend. They might be able to send the part. My experience with ML products is that a lot of their parts are non-standard and you won't be able to find a generic replacement. Also due to the value of the product you would probably want to use the correct part to maintain the value.

Their email address is:

CSupport@harman.com

-bob

re: no 28

well, you might start by identifying the monitor select as a switch and since you have the unobtanium knob which is the valuable part....go to a tech and get a replacement switch...

This website is not affiliated with or sponsored by Mark Levinson. To purchase no 28 spares or accessories, please contact the company via their website or visit an authorised retailer.