hifi engine

Manual Library / McIntosh

McIntosh MC502

Stereo Power Amplifier (1982)

add a review (1 review)

McIntosh MC502

Specifications

Power output: 50 watts per channel into 8Ω (stereo), 100W into 8Ω (mono)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.02%

Input sensitivity: 1V

Signal to noise ratio: 95dB

Speaker load impedance: 2Ω to 8Ω

Downloads

Related Catalogues

Products

State of The Art

Still The Best

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Reviews

 Login or register to post reviews

rating
Reviewed Sep 15th, 2017 by rhines4601

I have always love McIntosh for design and quality construction.
But my sister MC 502 died. I troubleshoot it and fond the secondary power out.
A cap was shorted witch toke out the diode and a WIRE THAT WAS USED AS A FUSE!
They used a 30g wire as a fuse, Bad Engineer, Bad Engineer ( you got to catch them in the act)
I replace the wire with two fuses one for the relay and one for backlights, or something like that.
I still give it a 4, due to it's a mac

 

Comments

This website is not affiliated with or sponsored by McIntosh. To purchase MC502 spares or accessories, please contact the company via their website or visit an authorised retailer.