hifi engine

Manual Library / NAD

NAD 120

AM/FM Stereo Receiver

add a review add a review

NAD 120

Description

The amplifier section of the NAD model 120 has directly coupled output stages, with a linear frequency curve of 20 to 20,000Hz at a nominal output, ensuring excellent bass reproduction and dynamic range.

The tuner unit is of the most up to date design. The superb results are made possible by the 3-gang variable capacitor with low noise FET and 2 FETs in the RF and mixing stage as well as IC and phase linear ceramic filters in the IF amplifier.

Most important is the MPX circuit with phase lock loop which increases stereo separation to more than 40dB at 1kHz. The tuner has separate AM and FM IF amplifiers. For accurate tuning a field strength meter is used.

Specifications

Tuning range: FM, MW

Power output: 20 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.2%

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 60dB (MM), 80dB (line)

Dimensions: 450 x 140 x 330mm

Weight: 8.5kg

Year: 1975

Downloads

Comments

This website is not affiliated with or sponsored by NAD. To purchase 120/model 120 spares or accessories, please contact the company via their website or visit an authorised retailer.