hifi engine

Manual Library / NAD

NAD C740

AM/FM Stereo Receiver (1998-01)

add a review (1 review)

NAD C740

Specifications

Tuning range: FM, MW

Power output: 35 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.03%

Signal to noise ratio: 104dB (line)

Speaker load impedance: 4Ω (minimum)

Dimensions: 435 x 110 x 290mm

Weight: 8.1kg

Accessories: remote control

Year: 1998

Downloads

Related Catalogues

Classic Series

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Reviews

 Login or register to post reviews

rating
Reviewed May 13th, 2018 by Rayrocks29

I bought this receiver back around 2003 to replace my separate components of a GAS Ampzilla II amp, a GAS Theobe pre-amp. And a Carver tuner. I no longer had space for these and sold them. I still have the Carver in my office setup with an integrated amp. It doesn’t have nearly the power of my 200 watt rms Ampzilla, but is adequate for driving my Dahlquist DQ 10’s with an M&K subwoofer in my small sunroom. The NAD is clean, quiet and musical. These are power hungry speakers and the receiver will clip to protect itself if overdriven. I did this to test it and it happened at much higher than my normal listening levels. If you have demanding speakers, a large room, and listen loudly, get more power. But for any normal setup this will be more than adequate.

 

Comments

This website is not affiliated with or sponsored by NAD. To purchase C740 spares or accessories, please contact the company via their website or visit an authorised retailer.