hifi engine

Manual Library / Nikko

Nikko STA-7070

AM/FM Stereo Receiver

add a review add a review

Nikko STA-7070


Tuning range: FM, MW

Power output: 43 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 50kHz

Total harmonic distortion: 0.5%

Damping factor: 30

Input sensitivity: 2.2mV (MM), 160mV (line)

Signal to noise ratio: 65dB (MM), 80dB (line)

Speaker load impedance: 4Ω (minimum)

Semiconductors: 2 x FET, 2 x IC, 47 x transistors, 25 x diodes

Dimensions: 455 x 137 x 370mm

Weight: 10kg



re: STA-7070

Output stage and other circuits, very identical to the STA-6060

This website is not affiliated with or sponsored by Nikko. To purchase STA-7070/STA-7070D spares or accessories, please contact the company via their website or visit an authorised retailer.