hifi engine

Manual Library / Onkyo

Onkyo Integra DTR-9

Audio Video Receiver (2000-08)

add a review add a review

Onkyo Integra DTR-9

Specifications

  • Tuning range: FM, MW

    Power output: 130 watts per channel into 8Ω (stereo)

    Surround output: 130W (front), 130W (center), 130W (rear)

    Frequency response: 5Hz to 100kHz

    Total harmonic distortion: 0.05%

    Damping factor: 60

    Input sensitivity: 2.5mV (MM), 200mV (line)

    Signal to noise ratio: 80dB (MM), 100dB (line)

    Output: 200mV (line), 1V (Pre out)

    Speaker load impedance: 6Ω (minimum)

    Digital inputs: coaxial, optical

    Video Connections: component, composite, SVHS

    Dimensions: 17-1/8 x 7-11/16 x 18 inches

    Weight: 49.4lbs

    Finish: black

    Accessories: remote control

    Year: 2000

  • Tuning range: FM, MW

    Power output: 145 watts per channel into 8Ω (stereo)

    Surround output: 145W (front), 145W (center), 145W (rear)

    Frequency response: 5Hz to 100kHz

    Total harmonic distortion: 0.05%

    Damping factor: 60

    Input sensitivity: 2.5mV (MM), 200mV (line)

    Signal to noise ratio: 80dB (MM), 110dB (line)

    Output: 200mV (line)

    Speaker load impedance: 4Ω to 16Ω

    Digital inputs: coaxial, optical

    Video Connections: HDMI, component, composite, SVHS

    Dimensions: 435 x 194 x 454.5mm

    Weight: 24.3kg

    Finish: black

    Accessories: RC-688M remote control

    Year: 2008

Downloads

Comments

This website is not affiliated with or sponsored by Onkyo. To purchase Integra DTR-9/DTR-9/DTR-9.1/DTR-9.9 spares or accessories, please contact the company via their website or visit an authorised retailer.