Quartz Synthesized Tuner Amplifier (1987-88)
Tuning range: FM, MW
Power output: 45 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 30kHz
Total harmonic distortion: 0.08%
Damping factor: 35
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 85dB (MM), 95dB (line)
Output: 150mV (line)
Video Connections: composite
Dimensions: 435 x 110 x 345mm
Accessories: remote control
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Jan 28th, 2016 by misterbearbaby
I recently had a chance to leisurely compare three vintage items: the Onkyo TX-82 receiver, a Denon DRA-345 receiver, and an Adcom 5200 power amp, all around 45-50 w/ch; $20-50 locally. The Denon was very clean and had good FM performance. I found it very listenable and comparable to the Adcom, though less dynamic. The Onkyo was warmer, muddy in the midrange, but was capable of high sustained output levels and has decent FM performance. Phono input sounded pretty good through headphones but exhibited the same limitations noted above through Advent speakers. Overall, the Onkyo had too much coloration for critical listening. The Adcom was a cut above the receivers for control of woofer cone motion and presented the most articulate bass plus impeccably clean mids and highs. It's a great little amp, purportedly a Nelson Pass design.