hifi engine

Manual Library / Onkyo

Onkyo TX-NR5010

Audio Video Receiver (2012-15)

add a review add a review

Onkyo TX-NR5010


Tuning range: FM, MW

Power output: 145 watts per channel into 6Ω (stereo)

Surround output: 145W (front), 145W (center), 145W (rear)

Frequency response: 5Hz to 100kHz

Total harmonic distortion: 0.05%

Damping factor: 60

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 80dB (MM), 110dB (line)

Speaker load impedance: 4Ω to 16Ω

Digital inputs: coaxial, optical

Video Connections: HDMI, component, composite

Dimensions: 435 x 198.5 x 463.5mm

Weight: 25kg

Accessories: remote control

Year: 2012


Related Catalogues

Audio Video

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: TX-NR5010

I definitely appreciate your selection of Onkyo TX-NR5010 documents that you have available. However, as a resident of the US, in North America, I'd like to see the original Brochure for the Onkyo TX-NR5010. The Brochure available here is for the European or Pacific/Asia Markets. The photo for the back of the receiver should show two sets of AM/FM Antenna Connections, not one. There should be commentary in the Brochure regarding HD Radio Capabilities, not DAB, meant for Europe. Is there any way you could secure the Brochure for the US/North American version on the Onkyo TX-NR5010? Onkyo no longer has any documentation for this receiver (US/North American version) available. Thank you again for your diligence in keeping this site up to date.

John Wagner

This website is not affiliated with or sponsored by Onkyo. To purchase TX-NR5010 spares or accessories, please contact the company via their website or visit an authorised retailer.