hifi engine

Manual Library / Onkyo

Onkyo TX-NR626

Audio Video Receiver (2013-14)

add a review add a review

Onkyo TX-NR626


Tuning range: FM, MW

Power output: 95 watts per channel into 8Ω (stereo)

Surround output: 160W (front), 160W (center), 160W (rear)

Frequency response: 5Hz to 100kHz

Total harmonic distortion: 0.08%

Damping factor: 60

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 80dB (MM), 106dB (line)

Output: 200mV (line)

Speaker load impedance: 6Ω to 16Ω

Digital inputs: coaxial, optical, USB, LAN, WiFi, BT

Video Connections: HDMI, component, composite

Dimensions: 435 x 173.5 x 328mm

Weight: 9.8kg

Accessories: RC-866M remote control

Year: 2013


Related Catalogues

Audio Video

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: TX-NR626

Note- these require the back-panel mounted to provide grounding for the PC boards. Otherwise, it will stay mostly dead in protect mode. Check continuity from each board's RCA jacks etc. to main ground if you are not sure.

This website is not affiliated with or sponsored by Onkyo. To purchase TX-NR626 spares or accessories, please contact the company via their website or visit an authorised retailer.