hifi engine

Manual Library / Paisley Research

Paisley Research model 30

3-Way Loudspeaker System

add a review add a review

Paisley Research model 30


The Paisley Model 30 is a bold new approach to loudspeaker design, one having all the virtues of an excellent eight inch two way system without its power handling limitations and attendant distortion.

The Model 30 incorporates a ten inch polypropylene low frequency driver in an optimally braced quasi third order vented enclosure for controlled low frequency response, an eight inch polypropylene mid-frequency driver mounted in its own damped enclosure for accurate mid-frequency reproduction, and a one inch polypropylene dome high frequency driver for crystal clear high frequency generation.

Countless tests were performed and evaluated during the Model 30 development period. The lack of colouration and distortion proved our engineering effort worthwhile.


Type: 3 way, 3 driver loudspeaker system

Frequency Response: 32Hz to 23kHz

Recommended Amplifier: 20 to 200W

Crossover Frequency: 300, 2000Hz

Impedance: 6Ω

Sensitivity: 91dB

Bass: 1 x 10" polypropylene cone

Midrange: 1 x 10" polypropylene cone

Tweeter: 1 x 1" polypropylene dome

Enclosure: vented

Finish: Alagash Birch vinyl

Dimensions: 790 x 400 x 250mm

Weight: 21kg



This website is not affiliated with or sponsored by Paisley Research. To purchase model 30 spares or accessories, please contact the company via their website or visit an authorised retailer.