hifi engine

Manual Library / Philips

Philips AG9018

Stereo Integrated Amplifier

add a review add a review

Philips AG9018


Power output: 12 watts per channel into 8Ω (stereo)

Total harmonic distortion: 3%

Input sensitivity: 3.5mV (MM), 200mV (line)

Signal to noise ratio: 60dB (MM), 75dB (line)

Speaker load impedance: 8Ω to 16Ω

Valve complement: 2 x EF86, 4 x ECC83, 4 x EL86

Year: 1966



steerpike_jhb's picture

re: AG9018

The AG9018 also supports Philips 800-Ohm loudspeakers in OTL (output transformer-less) mode. For this purpose it has special insulated 3-pin loudspeaker sockets (fairly high voltage)

This website is not affiliated with or sponsored by Philips. To purchase AG9018 spares or accessories, please contact the company via their website or visit an authorised retailer.