hifi engine

Manual Library / Philips

Philips AH686

AM/FM Stereo Receiver

add a review (2 reviews)

Philips AH686


Tuning range: FM, MW

Power output: 60 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.1%

Input sensitivity: 2.5mV (MM), 200mV (line)

Signal to noise ratio: 65dB (MM), 85dB (line)

Channel separation: 45dB (line)

Output: 200mV (line)

Speaker load impedance: 4Ω to 16Ω



 Login or register to post reviews

Reviewed Jul 08th, 2016 by kzeropode

well built

Reviewed Jan 26th, 2016 by ilkkasuni

In the 60's, I gathered Philips made good radios, both portable and table top models. During the 70's, I totally started to lost my interest in the brand Philips.

This very receiver model surprised me. Darn, this almost sounds good, or does it actually sound good? The AH686 even had loudspeaker connections for 3 pairs, and a microphone input with mixer option: now this is something.

Must admit, this was a receiver to consider. Still, I found the bass reproduction kind of thin, and was there something lacking to the high tones, too? Of all the Philips audio products I encountered, this was very close to play for the keeps.



This website is not affiliated with or sponsored by Philips. To purchase AH686 spares or accessories, please contact the company via their website or visit an authorised retailer.