hifi engine

Manual Library / Pioneer

Pioneer SX-102

Stereo AM/FM Receiver (1993-94)

add a review add a review

Pioneer SX-102


Tuning range: FM, MW

Power output: 45 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 50kHz

Total harmonic distortion: 0.07%

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 71dB (MM), 96dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω (minimum)

Dimensions: 420 x 140 x 289mm

Weight: 5.3kg


Related Catalogues

Audio Video Guide

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: SX-102

My unit has been stored in the loft for a while now I've set it up it was cutting in and out and has now stopped working all together apart from a sml switch like click after a few seconds..... Any ideas? Much appreciated Budd

This website is not affiliated with or sponsored by Pioneer. To purchase SX-102 spares or accessories, please contact the company via their website or visit an authorised retailer.