hifi engine

Manual Library / Pioneer

Pioneer SX-1300

Stereo AM/FM Receiver (1988)

add a review (1 review)

Pioneer SX-1300

Specifications

Tuning range: FM, MW

Power output: 40 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 70kHz

Total harmonic distortion: 0.01%

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 72dB (MM), 97dB (line)

Output: 150mV (line)

Speaker load impedance: 4Ω (minimum)

Dimensions: 420 x 120 x 337mm

Weight: 6.2kg

Accessories: FM T-type antenna, AM loop antenna

Downloads

Related Catalogues

HiFi Components

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Reviews

 Login or register to post reviews

rating
Reviewed Jan 15th, 2017 by Jamelyn

The Pioneer SX-1300 delivers 40 watts per channel. Clear, warm, crisp sound.
5 band graphic equalizer is nice and responsive, allowing you to fine tune your sound.
Very good sound quality: Crisp highs, mellow, deep lows.
Multiple inputs (Phono - Vinyl sounds great); CD (now music from computer); 2 Tape inputs (one now used for bluetooth); VCR/Line for multiple music sources. I updated it with a $20 bluetooth adapter and now can stream music to it.
AM/FM Stereo w/10 presets (I don't use much).
Summary: The Pioneer SX-1300 has a good feature set which sounds better than modern (2016-17) equipment, yet intergrates modern featurs like music streaming with a simple $20 bluetooth adapter.

 

Comments

re: SX-1300 remote

Hello!
Do you know where I could find a replacement remote for this Pioneer sx 1300??
Or something compatible?

joe jetson's picture

re: SX-1300

The Display on my Pioneer SX-1300 operates intermittently. Makes it difficult to determine Radio Station playing, which input is active, etc. I have examined it and I think the entire LED Display would have to be replaced, no bulbs to simply change.

Sound quality is good through my JBL Decade 36 speakers.

re: SX-1300

Its not a LED display ! Its Fluorescent indicator tube - i.e GAS ! No any bulbs. It must be only bad solders - resolder .

This website is not affiliated with or sponsored by Pioneer. To purchase SX-1300 spares or accessories, please contact the company via their website or visit an authorised retailer.